Speakers Wiring Harness

IDatalink MAESTRO ADS-MRR + HRN- RR-SU1 T Harness for Subaru 2008 to 2015

IDatalink MAESTRO ADS-MRR + HRN- RR-SU1 T Harness for Subaru 2008 to 2015
IDatalink MAESTRO ADS-MRR + HRN- RR-SU1 T Harness for Subaru 2008 to 2015
IDatalink MAESTRO ADS-MRR + HRN- RR-SU1 T Harness for Subaru 2008 to 2015

IDatalink MAESTRO ADS-MRR + HRN- RR-SU1 T Harness for Subaru 2008 to 2015
IDatalink MAESTRO ADS-MRR + HRN- RR-SU1 T Harness for Subaru 2008 to 2015. IDatalink's Maestro ADS-MRR module, along with the correct interface harness for your vehicle, allows you to install a new car stereo in select 2006-up Ford/Lincoln/Mercury, GM, Chrysler/Dodge/Jeep/RAM, Toyota/Scion, Honda/Acura, Fiat, Subaru, and Volkswagen/Audi vehicles while retaining your factory steering wheel audio controls and the use of your factory amplifier, if present. Here's how it works. First, you connect the Maestro to your computer using the included USB cable, visit idatalink web site and follow the instructions. Once the unit has been "flashed, " it's ready to go. Important Note: You will also need an additional Maestro vehicle-specific wiring harness that connects your new receiver to the ADS-MRR module and your vehicle's wiring.

Retain steering wheel audio controls, too. The ADS-MRR module also allows you to use your factory steering wheel audio controls with your new receiver. Using the intuitive web programming interface, each factory button can be assigned a specific radio function. Better yet, you can also assign a secondary "press and hold" radio function to each factory button, effectively doubling what can be controlled.

Keeping your factory features with an iDatalink-ready car stereo. Chrysler: You'll retain the use of the Uconnect® system (including voice command), along with your steering wheel audio controls and factory amp. Fiat: You'll retain your vehicle's factory amp, USB port, and backup camera.

Ford: You'll keep your SYNC® system, including the factory Bluetooth, satellite radio (in select vehicles, see Details), steering wheel audio controls, and other great features. GM: You'll retain the use of OnStar® system, along with your steering wheel audio controls, your factory amp, and safety warning chimes.

Honda: You'll retain your vehicle's steering wheel controls, Bluetooth, aux iInput, and factory amplifier. Subaru: You'll retain your steering wheel controls, factory amp and sub, and Subaru backup camera. Toyota: You'll retain your vehicle's A/V input, USB port, and backup camera. Volkswagen: You'll retain your VW's Bluetooth, the factory digital amplifier and fader, plus VW's media device interface. Select Kenwood receivers allow you to display navigation info on your VW's multi-function screen. See Details tab (above) for specific functions and installation notes. Allows installation of a new car stereo in select 2006-up Ford/Lincoln/Mercury, GM, Chrysler/Dodge/Jeep/RAM, Toyota/Scion, Honda/Acura, Fiat, Subaru, and Volkswagen/Audi vehicles. Retains factory convenience features (OnStar, SYNC, Uconnect, and more) with select Kenwood, Alpine, Pioneer, and JVC touchscreen receivers. Displays engine performance data on touchscreen with select Kenwood, JVC, Pioneer, Sony, and Alpine multimedia receivers.

Dimensions: 4-1/8"W x 3/4"H x 2-7/8D. What's in the box.

23 Wiring harness (18-pin to bare-wires). 23 Power/Ground harness (4-pin to bare-wires).

18 Interface harness (4-pin to 4-pin). 18 SWC harness (4-pin to 3.5mm/bare-wire). 22 Audio harness (3-Pin to 3.5mm). 3 Jumper harness (2-pin to 2-pin).

7 USB cable (miniUSB to USB-A). Allows installation of a new iDatalink-ready receiver in select Subaru models (also requires the Maestro ADS-MRR module). Only works with select Alpine, JVC, Kenwood and Pioneer receivers with iDatalink port.

Retains steering wheel audio controls. Retains your Subaru's amplifier and subwoofer (including the fader). Displays engine gauges and Check Engine codes on touchscreen. Working in conjunction with the Maestro ADS-MRR module, iDatalink's HRN-RR-SU1 interface harness allows you to connect a new iDatalink-ready car stereo in select 2008-14 Subaru vehicles. Once connected, you'll retain the use of your steering wheel audio controls, your Subaru's amplifier and subwoofer (including the fader), and the factory back-up camera in these vehicles.

This installation harness will not work with car stereos that do not feature an iDatalink serial port. The package includes connectors that plug in between the Maestro module and your Subaru radio's wiring plugs. You'll have to solder or splice together this harness's power/ground, illumination, speaker, and navigation output wires to the corresponding wires on your aftermarket receiver's wiring harness. With your iDatalink-ready car stereo, you'll be able to set up gauges on your receiver's screen to monitor engine performance, tire pressure, and other functions. You'll also be able to read and reset the vehicle's Check Engine codes.

Installation note: The HRN-RR-SU1 harness must be used with the iDatalink Maestro ADS-MRR module to connect a new car stereo to your Subaru vehicle. 2009 - 2013 Forester (Base). 2011 - 2013 Forester (with factory Bluetooth). 2008 - 2011 Imprezza (Base). 2011 - 2011 Imprezza (with factory Bluetooth). 2008 - 2011 Imprezza WRX (Base). 2011 - 2011 Imprezza WRX (with factory Bluetooth). 2010 - 2014 Legacy (Base). 2012 - 2014 Legacy (with factory Bluetooth). 2010 - 2012 Legacy (with factory Navigation and Bluetooth). 2010 - 2012 Legacy (with factory Navigation, Bluetooth and Harmon Kardon audio system). 2010 - 2011 Legacy (with factory Bluetooth and Harmon Kardon audio system).

2010 - 2014 Outback (Base). 2012 - 2014 Outback (with factory Bluetooth). 2010 - 2012 Outback (with factory Navigation and Bluetooth). 2010 - 2012 Outback (with factory Navigation, Bluetooth and Harmon Kardon audio system). 2010 - 2011 Outback (with factory Bluetooth and Harmon Kardon audio system).

2012 - 2014 WRX (Base). 2012 - 2014 WRX (with factory Bluetooth).

2012 - 2014 WRX STi (Base). 2012 - 2014 WRX STi (with factory Bluetooth). Below you will find detailed descriptions of our policies. Please note that although we are responsible for getting your product from our warehouse to your carrier, any event that follow is the responsibility of the customer (you) and your third-party carrier. Any package exceeding one pound 1 lb.

As noted above, domestic packages that weigh less that one pound 1 lb. All domestic packages that exceed one pound 1 lb.

Please read our policy carefully as we cannot process a return in the unfortunate event that the below conditions are not met. We are an authorized online dealer offering quality products from reputable brands. Merchandise must be in its original condition and packaging. Merchandise must contain the original UPC codes. Merchandise must contain the original serial numbers.

UPC codes and serial numbers cannot be altered or tampered with in anyway. Customers must include a copy of their professional certified installer receipt and note stating what is wrong with the unit. Merchandise that is discovered to be defective upon receipt will be replaced with the same model. You must allow us 48 hours (not including weekends) , to inspect and fix the defective item(s). We encourage you to thoroughly inspect your order upon receipt.

Customers are responsible for their products after signing for it. Large Merchandise includes the following. Televisions larger than 32 inches in size. Furniture and any other oversized products.

You must also contact UPS to verify that the product was damaged. Upon verification we will issue you a replacement.

If you received a defective item, we will replace the item. You must also contact UPS to verify that the package was damaged.

Any product without a valid, readable serial number, including but not limited to products with missing, damaged, altered, or otherwise unreadable serial number. Any product from which the UPC code has been removed from its packaging. Any product that exhibits physical damage or abuse.

Any car audio equipment that has been installed or where the wires have been cut. Please note that products that are not eligible for return for any of the above reason(s) will be sent back to you at your cost and expense. HOW DO I RETURN AN ITEM?

Please have your order number ready when contacting us. Step 2: Carefully Pack Your Item Please safely package the merchandise in its original packaging with all its original contents. Please note that we cannot be held responsible for any return that gets lost or damaged on its way back. Listing and template services provided by inkFrog.

The item "IDatalink MAESTRO ADS-MRR + HRN- RR-SU1 T Harness for Subaru 2008 to 2015" is in sale since Monday, July 20, 2020. This item is in the category "eBay Motors\Parts & Accessories\In-Car Technology, GPS & Security\Terminals & Wiring\Wiring & Wiring Harnesses". The seller is "12voltx" and is located in USA. This item can be shipped to United States, Canada, United Kingdom, Australia, Mexico, Germany, Japan, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Greece, Portugal, Cyprus, Slovenia, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Austria, Bahamas, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Russian federation, Philippines, Ukraine, Cayman islands.

  • Brand: iDataLink
  • Manufacturer Part Number: ADS-MRR + HRN-RR-SU1
  • Bundle Description: ADS-MRR + HRN-RR-SU1


IDatalink MAESTRO ADS-MRR + HRN- RR-SU1 T Harness for Subaru 2008 to 2015